The StrikeMaster II Pro is the flagship product of the Safe Homes, Inc. product line. It represents the first product we engineered to protect American homes and businesses from unwanted intruders. It has also been refined and improved over the years into the state-of-the-art product we now offer. Our entire line of exterior door protection products represent the BEST HOME PROTECTION VALUE PER DOLLAR that you can spend to ensure your family's safety and peace-of mind!

 

As an added value, the NEW StrikeMaster II Pro now comes with the Door Edge Pro at no additional charge!

 

StrikeMaster II PRO does not require additional locking devices. Its installation adds nearly 5 feet of customized steel strength to your existing door frame. It is powder coated white to match most homeowner's trim colors or you can paint it to match your decor. It's constructed of two parts; both pieces fit together making one unit that goes on the locking side of the frame, this two piece U.S. PATENTED construction eliminates the removal of the door casing trim, saving valuable time. Designed with standard cuts 5 1/2 inches - 6 inches between dead-bolt and entry lock, StrikeMaster II PRO is 1/8" thick and fits any 1-3/4" door-frame without the need to alter {mortise} the door casing or frame design. You don't have to remove any of trim for installation. This heavy-duty strike plate uses 2.5-inch wood screws to cut deep into the existing door frame stud. Most installations take less than 30 minutes. 

According to the FBI, the easiest way for a criminal to get into your house is just to kick in your door!

 

The FBI says every 12 seconds a home is invaded by going right through the front or back door. This is called door frame failure. Two o'clock in the afternoon is the biggest break-in time.

 

Open your front door and look at the dead bolt plate. There is just one inch of soft wood protecting the safety of your home - your door casings can not protect you from a thief kicking your door.

 

How would you go about making an existing doorway more secure? Even with a well constructed home, with a good door, how can you be sure your door is secure? A good, secure entryway is one of your first lines of defense, especially against today's dynamic home invasions. So how DO you go about securing your entryways? You need security doors and security door locks.

 

Do you have a Broken Door Frame? Fixing it "forever" is as simple as 1, 2, 3. Just check out out Broken Door Repair page in the Education/FAQ Section!

 

CHECK OUT THIS INDEPENDENT CASE STUDY PERFORMED BY
THE BROOKLYN PARK POLICE DEPARTMENT - on their Facebook Page...

http://www.facebook.com/video/video.php?v=3091586527246

 

A door is easy to kick in - even with a deadbolt securely locked - because the wooden door frame makes it easy to kick in the door.

 

A deadbolt lock alone does not secure your door! The most common way used to force entry through a door with a wooden door frame is to simply kick it or shoulder slam it open. The weakest point is almost always the lock strike plate that holds the latch or lock bolt in place. A home security device like deadbolts and steel doors are not the problem. The average door strike plate is secured only by the soft-wood door jamb molding. These lightweight moldings are often tacked on to the door frame and can be torn away with a firm kick or shoulder slam. Chiseling and removing wood to fit the locks will also result in a much weakened door frame.

 

Installing the StrikeMaster II not only repairs the damage to the door, it makes the door impervious to future kick-ins.

 

See what's behind your trim and drywall.

 

Unless extra reinforcement is taken to strengthen the door frame, a forced entry or kick-in burglary will split open the wooden door frame around the lock. FBI statistics show 70% of all break-ins are from door-frame failure.

 

Because of these construction flaws, it makes sense to upgrade to a heavy-duty, high security strike plate. The photo to the left shows the deadbolt was useless when kicked. Door jamb repair or replacement will not hold unless you strengthen the door casings with the patented StrikeMaster II PRO. Door jamb reinforcement is the key to keeping criminals out of your home.

 

The new and improved StrikeMaster II PRO offers a unique and innovative solution to prevent burglars from entering your home, StrikeMaster II PRO strikes-back and provides instant security for your door. StrikeMaster II PRO's patented strike plates make the door casing virtually unbreakable. This is the easiest to install door jamb reinforcement product on the market today installed on over 20,000 homes. There is no casing trim removal, no door planing or cutting away of the door frame.

 

Easy Do-It-Yourself project that you can do in about 30 minutes. StrikeMaster II does not require additional locking devices. Its installation adds nearly 5 feet of customized steel strength to your existing door frame. It is powder coated white to match most homeowner's trim colors or you can paint it to match your decor. It's constructed of two parts; both pieces fit together making one unit that goes on the locking side of the frame, this two piece; PATENTED construction eliminates the removal of the door casing trim, saving valuable time. Designed with standard cuts 5 1/2 inches - 6 inches between dead-bolt and entry lock, StrikeMaster II PRO is 1/8" thick and fits any 1-3/4" door-frame without the need to alter (mortise) the door casing or frame design. This heavy-duty strike plate uses 2.5-inch wood screws to cut deep into the existing door frame stud. Most installations take less than 30 minutes. We even provide 21/2" long screws for the hinge side of the door to add strength to that side as well. Visit our installation page to watch a quick installation video and download a copy of our installation guide. (Acrobat PDF). See how easy it is. Please follow all instructions sent with the product. Use this door frame template to cover your door frame to see if it will fit.

 

Security is in the details!

Replace the small screws currently securing your door frame with our case hardended screws. You get THIRTEEN 2.5" screws for the jamb side, SIX 1.5" screws that anchors the hinge to the door and SIX 2.5" screws that anchors the hinge to the frame. All of these come standard with the Strike Master II Pro.

 

Industry Standards, OR StrikeMaster II Pro Standards? You choose.

 

 

We GUARANTEE your door-frame will not break!

Not one StrikeMaster II PRO has failed yet. If a homeowner experiences "door frame failure" following the proper installation of the StrikeMaster II PRO, using the the hardware provided and PROPERLY ANCHORED into the 2x4 HOLDING THE DOOR unit, Safe Homes International Inc. will issue a refund for the full purchase price of the StrikeMaster II Pro.

We ask that you provide a BREAK-IN report from your local Police Department and photos of the BREAK-IN. The photos MUST be taken before any repair of frame has taken place.

StrikeMaster II PRO offers a cost effective product to individual consumers seeking A SAFER HOME. StrikeMaster II PRO anti-burglary door-frame-strike-plates have been sold to thousands of homeowners all across the country. 

“I have an alarm system. Won't that protect me?"
Though we do recommend an alarm system it won't protect you against an “After-The-Fact" home invasion. An alarm system just tells you that burglars are already in your home. With crime on the rise across the country police are working over time just to keep up. In many states across the country the police are not even responding to home alarms anymore because of so many false alarms. (98% are FALSE ALARMS).

 

Here are 2 stories about police not responding (#1 & #2) we found in with a Google search in just 5 minutes. Criminals know this very well. Alarms only tell you when the crime has happened. It doesn't keep them out! StrikeMaster II PRO is always on duty. It provides enhanced physical strength and security CONSTANTLY each time the door is closed and locked - turning your doors into home security doors. This one step alone will greatly deter or prevent most through-the-door forced entries so you and your family will sleep safer in the future. Worst of all, if your home is burglarized it stands a 50% greater chance of being burglarized again. Besides StrikeMaster II PRO is home security equipment that you only pay for once - no codes or no false alarms to worry about.

Features and Benefits of the all new StrikeMaster II PRO

We listened to our customers and made changes to make our StrikeMaster II even better

Change #1

• The original StrikeMaster II had a 59 " elongated 90 degree bend sometimes caused the entry door strike to not engage.
• The New & Improved StrikeMaster II PRO solves the problem by incorporating a strike plate in the door entry lock area.

Change #2

• The original StrikeMaster II is designed with a pre-cut hole at 5 1/2 - 6 inches for the customer's deadbolt. This is the industry standard. Sometimes deadbolts are installed not at industry standards and the customer has to alter the StrikeMaster II (as instructed) to accommodate the deadbolt. This leaves an extra hole in the StrikeMaster II.
• The New & Improved StrikeMaster II PRO solves the problem by incorporating a knock-out at the standard distance, which in most cases will be used. But if the customer has to alter the StrikeMaster II PRO the knock-out will be left in place.

Change #3

• The original StrikeMaster II sometimes caused the entry door strike to not engage as tight as it was before installation.
• The New & Improved StrikeMaster II PRO solves the problem by incorporating an adjust-a-tab in the strike plate in the door entry lock area that tightens the seal of the door when closed.

Change #4

• The original StrikeMaster II width is 1 3/4", which sometimes caused the weather stripping to get caught behind the back edge of the StrikeMaster II thereby not allowing a good air tight seal when the door is closed.
• The New & Improved StrikeMaster II PRO solves the problem by increasinig the width to 1 7/8" so the weather stripping can not get behind the back edge.

The StrikeMaster II PRO is POSITIVELY the most user friendly and the easiest to install door frame reinforcement product on the market. Over 20,000 homeowners can't be wrong!